Application Guide

Please ensure surfaces are clean, and free from any contaminants.  We find rubbing alcohol is great for this.

1. Gently peel back the transfer tape, (this will usually be clear or paper type).  This should have the decal on, leaving the backing paper, which can be discarded. 
2. Place the decal and transfer tape on your chosen surface.
3. Gently rub the transfer tape, ideally with a squeegee or maybe a bank card type item.
4. Slowly peel back the transfer tape down at a 45 degree angle. This should leave your decal in place.
5. Any air bubbles usually disappear after a few days, stubborn bubbles can be squeezed out using a pin.
6. Try not to wash the area for at least a week, and give the decal a chance to bond.
7. Enjoy your decal. ; )

During winter months, gently warm your chosen surface with a hairdryer or similar, taking care with glass, this only needs to be above room temperature, as vinyl can be tricky to apply to cold surfaces.